Farm Equipment - Advice Needed C02 Cartridge Leak

Print Page | Close Window

Advice Needed C02 Cartridge Leak

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46314
Printed Date: 05 Sep 2025 at 8:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Advice Needed C02 Cartridge Leak

Posted By: Mike(RavNE)
Subject: Advice Needed C02 Cartridge Leak
Date Posted: 26 Feb 2012 at 9:15pm

I was fooling around with my paintball gun and the mechanism that punctures the c02 cartridge developed a leak. It leaks so bad that I cannot fire the gun because the cartridge leaks out too fast. Upon further inspection, there appears to be a waxy filler like material around the puncture device that creates an air tight seal. This dried up and more or less ripped.

Is there a product that I can buy to replace this wax ring? It needs to be air tight.

Can I just tighten down the cartridge holder clamping mechanism. Will this create enough pressure to create an air tight seal.

Any help would be appreciated.

Replies:

Posted By: AC WD45
Date Posted: 26 Feb 2012 at 9:21pm

I believe there is a section for this called

http://www.allischalmers.com/forum/forum_topics.asp?FID=4&title=shops-barns-varmints-and-trucks" rel="nofollow - Shops, Barns, Varmints, and Trucks

-------------
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193

Posted By: JimD
Date Posted: 26 Feb 2012 at 10:20pm

Would be better in other section. Search on that model and you will see it's a common problem. It's a big reason I decided against buying it from you. Probably not worth fixing as the repair kit is more than the piston is worth.

JimD

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: Mike(RavNE)
Date Posted: 26 Feb 2012 at 10:53pm

Sorry. Next time I will post in the appropriate section.