Farm Equipment - snap coupler to 3 point

Print Page | Close Window

snap coupler to 3 point

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46242
Printed Date: 08 May 2024 at 4:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: snap coupler to 3 point

Posted By: prospolaris
Subject: snap coupler to 3 point
Date Posted: 25 Feb 2012 at 8:16pm

Have a set of snap coupler plows and I was wondering I'd I could change them to 3point to fit the 190. They are a set of 4 x 16 and would save me some omoney. Also have snap coupler discs. Can I just use a clevis and pull them that way and just get longer hyd. Hoses. Will it work correctly.

Replies:

Posted By: DaveKamp
Date Posted: 26 Feb 2012 at 12:10am

Given the proper equipment, materials, and skills, essentially ANYTHING can be adapted to a 3-point...

Posted By: Pete from IL
Date Posted: 26 Feb 2012 at 1:18pm

I remember my Dad pulling a snap coupler disc using a clevis and hooked on a standard drawbar. As far as I know it worked fine.