Farm Equipment - All Crop cylinder bar condition? / For Sale

Print Page | Close Window

All Crop cylinder bar condition? / For Sale

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45829
Printed Date: 05 Sep 2025 at 8:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: All Crop cylinder bar condition? / For Sale

Posted By: Murph-NC
Subject: All Crop cylinder bar condition? / For Sale
Date Posted: 18 Feb 2012 at 6:22pm

I found a cylinder bar at the farm today for one of the 60s or 66s. It still has a good half inch thickness of rubber in good condition except for weather cracks. All the others I've found are less than 1/4 inch thick. Is half inch thick enough to be usable? If so, I'd love for someone to get some use out of this one.

-------------
'41 C w/Woods L503 mower, #3 mower, 2-way plows for C

Replies:

Posted By: Ryan Renko
Date Posted: 18 Feb 2012 at 7:08pm

To keep the cylinder in balance and avoid damaging vibration the cylinder bars need to all be the same in terms of weight/wear. So one really wont do much good. Ryan

Posted By: Murph-NC
Date Posted: 18 Feb 2012 at 7:12pm

Thanks Ryan, that's good to know. I already had plans for it to become a birdhouse post anyway.

-------------
'41 C w/Woods L503 mower, #3 mower, 2-way plows for C

Posted By: Tycer
Date Posted: 27 Feb 2012 at 3:23am

Murph,
I need it please. I found seven NOS in AL