drawbar for a allis CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45701
Printed Date: 18 Jul 2025 at 9:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: drawbar for a allis CA
Posted By: starstepper020
Subject: drawbar for a allis CA
Date Posted: 16 Feb 2012 at 3:49pm
| have an1952 Allis Chalmers CA Looking for a drawbar--- not sure what it need -- there is a woods L59 belly mower on it. looks like a b drawbar would work but it has to be much wider than a B, their is a mounting pin under the tractor just in front of the rear axles. Looks like a C shaped drawbar which fastens to final drive would work if allis made one , Any help would be appreacated Thanks Phone 315 668 9804 |
Replies:
Posted By: CTuckerNWIL
Date Posted: 16 Feb 2012 at 4:42pm
|
The pin hitch drawbar attaches to the pin under the belly and to the lift arms when they are in the vertical position. You could probably bolt a C drawbar to it but the mower would have to be off. I have had the Woods mower on my CA with the pin hitch drawbr in place after altering the Woods brackets. Sorry I don't have a pic right now. Charlie
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: starstepper020
Date Posted: 16 Feb 2012 at 5:06pm
| thanks for your input, have a great evening |
Posted By: Glockhead SWMI
Date Posted: 16 Feb 2012 at 5:24pm
| a c drawbar bolts on and works good. |
Posted By: Leon B MO
Date Posted: 16 Feb 2012 at 6:27pm
 ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: Leon B MO
Date Posted: 16 Feb 2012 at 6:31pm
|
Forgot to add my text. This is how I put a hitch on my CA. My factory drawbar would have been in the way for the belt. So I welded two small peices of angle iron to the cross pipe then two pieces to a reciever and just bolted to tractor crossbar. I can use any hitch that I have for my truck, ball, riser, lower, or pin.
Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: Dick L
Date Posted: 16 Feb 2012 at 6:36pm
You can use the C drawbar with a woods mower. |
Posted By: norm[ind]
Date Posted: 16 Feb 2012 at 7:42pm
| we havve a C DRAWBAR if needed 1-800-254-3116 |
Posted By: Dakota Dave
Date Posted: 16 Feb 2012 at 8:07pm
|
you can use either a CA pin hitch drawbar or a C drawbar with the woods mower mount without any modification. I have one of each they both work fine. My CA also has a loader mounted at the same time. I take the loader arms and rams off during the summer when the mower deck is on. |
Posted By: CTuckerNWIL
Date Posted: 16 Feb 2012 at 8:13pm
I have the universal mount tube like Dicks, works on a B,C or CA. The pin hitch drawbar will not fit unless it is lowered. There are different mounts and maybe one like Leon has would work with the pin hitch drawbar. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Dakota Dave wrote:Posted By: Steve(SEMN)
Date Posted: 16 Feb 2012 at 8:38pm
|
We have a non snapcoupler wd drawbar on our CA that is bolted around the horizontal iron piece. Sticks out a bit more but is nice to use as a step to get on tractor. It had to be modified a bit at the front anchor point. |