duals for my 8070
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45023
Printed Date: 11 Sep 2025 at 10:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: duals for my 8070
Posted By: darrel in ND
Subject: duals for my 8070
Date Posted: 05 Feb 2012 at 8:58am
|
Wondering if anyone has, or knows where I can get, a set of 20.8-38 axle mount duals that will fit my 8070. I need the hubs and all. I haven't tried any salvage yards yet, but I thought I'd run it by here first. I'll have to go with a non-radial, because the insides aren't radials. Thanks, Darrel
|
Replies:
Posted By: Matt MN
Date Posted: 06 Feb 2012 at 9:23am
I know of a set that came off an 8030, not sure if the axle is the same diameter or not.
-------------
Unless your are the lead horse the scenery never changes!!
|
Posted By: darrel in ND
Date Posted: 07 Feb 2012 at 9:09pm
|
Matt, I don't know if the axle sizes are the same or not, either. Maybe someone will chime in and tell us, Thanks, Darrel
|
Posted By: Unit3
Date Posted: 07 Feb 2012 at 9:44pm
|
You better messure them. Our 85's have the long axles and they are 4" like the 7080's. I can not find it when I want it, but I have read somewhere that the 8070 had 3.75" long axles. What is it grandpa would say? "messure twice, cut once".
|
Posted By: Jordan(OH)
Date Posted: 08 Feb 2012 at 1:42am
|
8030 has 3-5/8 8070 has 3.75 or 4''
|
Posted By: darrel in ND
Date Posted: 08 Feb 2012 at 1:39pm
|
I measured my axle today on the 8070, it's 3.75
|
Posted By: nevans
Date Posted: 08 Feb 2012 at 8:40pm
|
Wish we closer have some 10 bolt rims and hubs niel
|
Posted By: darrel in ND
Date Posted: 08 Feb 2012 at 9:08pm
|
nevans, ND to IL is only a few inches on the map! But, yeah it is too bad you are so far away, sounds like you have just what I need. Maybe some one on here will pick up on this and know of a ride for them. It is a small world you know. How much would you have to have for the rims and hubs? Thanks, Darrel
|
|