Need a steel line reproduced
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44867
Printed Date: 11 Sep 2025 at 8:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need a steel line reproduced
Posted By: ILGLEANER
Subject: Need a steel line reproduced
Date Posted: 01 Feb 2012 at 10:00pm
|
Luke R was good enough to borrow a line off of his D21. It is the line from the Hyd. pump to the hyd block on the platform. Does anyone know where I could get a steel line made from a pattern? It has multiple bends in it.
Thanks,
IG
-------------
Education doesn't make you smart, it makes you educated.
|
Replies:
Posted By: ctbowles58
Date Posted: 01 Feb 2012 at 10:09pm
could you replace it with rubber? i did on my 190XT
|
Posted By: Travis(NE)
Date Posted: 01 Feb 2012 at 10:24pm
|
Wasn't JimWenigOH getting some made for a 190 back in November? Wonder how his turned out and if he would recommend whoevere made his?
|
Posted By: Tracy Martin TN
Date Posted: 01 Feb 2012 at 10:24pm
What size, how many bends, what type of connector? Tracy Martin
-------------
No greater gift than healthy grandkids!
|
Posted By: darrel in ND
Date Posted: 01 Feb 2012 at 10:28pm
|
I got one of the lines that Jim Wenig had made, it seems to be a good job. So if Jim would see this post, or you could PM him, and he could put you through to the company he used. Darrel
|
Posted By: ILGLEANER
Date Posted: 01 Feb 2012 at 10:31pm
|
Tracy if you think you could make it I will bring it with me this weekend. I am coming your way.
IG
-------------
Education doesn't make you smart, it makes you educated.
|
Posted By: Tracy Martin TN
Date Posted: 01 Feb 2012 at 10:40pm
John, without seeing it I don't know. I am not familar with that particular line. Sounds like Jim might have already done the hard part. Tracy Martin
-------------
No greater gift than healthy grandkids!
|
Posted By: Redwood
Date Posted: 02 Feb 2012 at 7:09am
|
Woke up and reread the post...I retract that comment. but no delete button
|
Posted By: StewartMD
Date Posted: 02 Feb 2012 at 7:15am
There is a local ag parts store here that makes custom steel lines. They will match what you bring in. Sometimes when you put it back on you might have to tweek it a bit or they recommend putting a 1' piece of rubber line at the end to give you some flex to guarentee that it will fit.
-------------
8030, 8010, 220, 185, 160, D-17, WD, Unstyled WC, CA, G, 20-35, Gleaner E
|
Posted By: Butch(OH)
Date Posted: 02 Feb 2012 at 7:23am
|
I dont know where Jim has them made but there is a place here in Columbus called Mid-state hose and fitting and they can replicate just about any steel line or fitting a person can come up with.
Mid-State http://mshose.com/" rel="nofollow - http://mshose.com/
|
Posted By: TedBuiskerN.IL.
Date Posted: 02 Feb 2012 at 2:58pm
I had a return line from the transport valve back the hydralic sump for my D14 made at my local big truck repair facility. Metal specialties.
-------------
Most problems can be solved with the proper application of high explosives.
|
Posted By: JimWenigOH
Date Posted: 02 Feb 2012 at 4:26pm
|
The company that made the tube for my 190 was Mid-State Sales in Columbus, OH. Ask for Nadine Lewis 800-421-7051, extension 21. This is an excellent company to do business with, and the tubes I had made fit perfectly. They had multiple tight bends, one being right at the end of the tube. Your best option in my opinion would be to have 5 made, and sell the rest here on the forum as I did with my extras. My local Agco dealer bought one of mine too. You will cut your cost per unit quite a bit going this route, and help others as well.
|
Posted By: amac
Date Posted: 02 Feb 2012 at 5:50pm
|
I don't know how far from Burlington Ia you are but there is a place called Brozene hydraulic. They can make about any steel line or hose up to 6000 psi. They made a steel line for my 220 from the valve to the lift arms.
|
Posted By: ILGLEANER
Date Posted: 06 Feb 2012 at 4:54pm
|
amac ,
I brought the line from near Burlington Ia , To try to find someone to make me one. Wish I would have know that. Thanks for all of the leads
IG
-------------
Education doesn't make you smart, it makes you educated.
|
|