Construction and other equipment - AC drive sprocket wanted

Print Page | Close Window

AC drive sprocket wanted

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4466
Printed Date: 05 May 2024 at 11:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC drive sprocket wanted

Posted By: Dave Merrill
Subject: AC drive sprocket wanted
Date Posted: 30 Nov 2009 at 7:59pm

Looking for a pair of AC 9 tooth drive sprockets p/n 646974 for D motor grader, new or used. Any suggestions welcomed. Where is the best place (s) to look for used motor grader parts?

Thanks,

Dave Merrill

Replies:

Posted By: Coke-in-MN
Date Posted: 30 Nov 2009 at 8:59pm

Depending on the size of the chanin that runs on them and the bore ? You might be able to get a stock sprocket with open bore and weld to present hub.

Check with some bearing houses for these units.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."