where to get a set of liner orings for a model c
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44612
Printed Date: 12 Sep 2025 at 8:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: where to get a set of liner orings for a model c
Posted By: jb from md
Subject: where to get a set of liner orings for a model c
Date Posted: 28 Jan 2012 at 7:48pm
|
im looking for a whole set of liner o rings for a model c engine, any one know where to get them? thanks for any help...Jb ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Replies:
Posted By: Fred in Pa
Date Posted: 28 Jan 2012 at 7:50pm
| After market sleeves or AC sleeves |
Posted By: norm[ind]
Date Posted: 28 Jan 2012 at 7:53pm
| are your liners original ????[ we have new set a-c only] m& w liners are diidifferent along with many others 1-800-254-3116 |
Posted By: jb from md
Date Posted: 28 Jan 2012 at 7:55pm
|
they are aftermarket i bought a overhaul kit years ago and was getting water in the oil immediatley and found a bad liner oring. tore it down to clean it all up and want to put it back together now . i dont even remember where i got the kit...Jb ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Posted By: jb from md
Date Posted: 28 Jan 2012 at 7:59pm
|
i really would like to find a running engine for it . the tractor is really nice but if i cant get the orings im kind of stuck. when i bought it the engine was in pieces i should have left it there...Jb ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Posted By: Tom IA
Date Posted: 28 Jan 2012 at 8:58pm
| tAKE YOUR SLEEVE TO ANY PLACE THAT HANDELS ORINGS THEY CAN FIX YOU UP ,START WITH A LOCAL BEARING CO SOME OF THEM HAVE ORINGS, IF NOT THEY CAN TELL YOU WHO DOES, ORINGS ONLY COME IN A FEW GLAND SIZES , IN EACH SIZE THIER IS A VARIETY OF LENGTH FOR THE PROPER OD TOM |
Posted By: Ted in NE-OH
Date Posted: 28 Jan 2012 at 9:01pm
|
Sandy Lake Implement 1-888-252-0656 or any of the advertizers on this site. ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: dave63
Date Posted: 28 Jan 2012 at 9:50pm
|
I just went to Dads parts bin and got a set out a couple months ago.
I'm sure they would have restocked it by now. ------------- The universal answer to all questions is yes, how much do you want to spend? |
Posted By: mdtractormechanic
Date Posted: 28 Jan 2012 at 10:35pm
|
What is the difference between AC and aftermarket liners and o-rings? ------------- Joe's 1939 Model WC, 1940 Model RC, 1944 & 1950 Model C's, B-125 PU |
Posted By: SteveM C/IL
Date Posted: 28 Jan 2012 at 11:27pm
| some aftermarket used thinner dia...cross section |
Posted By: steve(ill)
Date Posted: 29 Jan 2012 at 8:26am
|
i have bought both at McMaster Carr on line.. dont remember the numbers off hand, but your right , the MW were a thinner cross section. ------------- Like them all, but love the "B"s. |
Posted By: mdtractormechanic
Date Posted: 29 Jan 2012 at 8:37am
|
So the grooves in the aftermarket sleeves are smaller as in width and depth of cut? ------------- Joe's 1939 Model WC, 1940 Model RC, 1944 & 1950 Model C's, B-125 PU |
Posted By: CTuckerNWIL
Date Posted: 29 Jan 2012 at 10:38am
|
YEP!!!!
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: DaveKamp
Date Posted: 29 Jan 2012 at 10:52am
| You could do it strictly by measurement, but I'd recommend you pull the sleeve, and take sleeve AND an old O-ring in to the shop when you go. Another suggestion is any place that does hydraulic seals and fittings- they typically have someone in their line-card that does such things, and as such, will be able to properly source the right ring material for the application. |
Posted By: Dick L
Date Posted: 29 Jan 2012 at 11:20am
If you haven't picked them up yet PM me your address and I will send you a set eight of them. |
jb from md wrote: