Oxnard spring-tooth harrow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43928
Printed Date: 06 Jun 2025 at 3:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Oxnard spring-tooth harrow
Posted By: Farrell(Utah)
Subject: Oxnard spring-tooth harrow
Date Posted: 16 Jan 2012 at 8:08pm
Here are some pictures of my recently acquired two-bar spring-tooth harrow. It is shown on Page 237 of Swinford's book under the Oxnard tool carrier section. I need one of the shanks if anyone has an extra. Thanks.  ------------- A(1937), 2 G, 2 WD45 diesels, 6 WD45 gas, UC, 2 WD, D17 gas, WF, Farmall 400, D12, Kubota B3030 |
Replies:
Posted By: Eldon (WA)
Date Posted: 16 Jan 2012 at 8:11pm
|
I've never seen a shank like that. Thanks for posting the pic. ------------- ALLIS EXPRESS! This year: |
Posted By: Dave (NE)
Date Posted: 16 Jan 2012 at 8:36pm
| Boy, that is unique. I'd like one of those. Have you tried it out yet? |
Posted By: Farrell(Utah)
Date Posted: 16 Jan 2012 at 8:53pm
|
I got this thing about two weeks ago and got it attached to the tool-bar last week so it has not been used. Here's hoping that it will work like a Danish harrow that are used a lot around here to work down fall plowing. ------------- A(1937), 2 G, 2 WD45 diesels, 6 WD45 gas, UC, 2 WD, D17 gas, WF, Farmall 400, D12, Kubota B3030 |
Posted By: Unit3
Date Posted: 16 Jan 2012 at 10:06pm
| Are you sure yours isn't the one in the book? Until tonight, the one in the book is the only one I have ever seen. That has got to be rare. Great find. |
Posted By: WD45
Date Posted: 16 Jan 2012 at 10:33pm
|
Hello Farrell - a wonderfull looking tillage tool Farrell. I have never seen one of these before. Dad had a 15 tooth "C" shank Allis s/c cultivator that we pulled behind the WD.
I could cultivate 5 acres an hour running wide open (curved gear shift) in 3 rd gear 5 mph on 12x28 tires and thought this was wonderfull since this cultivator was great improvement over the 1942 - 17 tooth Chochutt cultivator dad had. Now we run a 43 ft SunFlower finisher behind a Case/Int 535 and there is no end to the power this 15 liter engine has and one can go 7 or 8 mph. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: Don(MI)
Date Posted: 17 Jan 2012 at 6:45am
|
That is COOL! Never ceases to amaze me at the diversity of SC equipment!! ------------- Galatians 5:22-24 "I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!" |