WD Weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43873
Printed Date: 10 Aug 2025 at 1:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Weights
Posted By: DOlson
Subject: WD Weights
Date Posted: 16 Jan 2012 at 7:01am
|
How long do the bolts need to be to hang two weight sets on a WD. I want to buy the right bolts. Thank you, Derrick |
Replies:
Posted By: ctbowles58
Date Posted: 16 Jan 2012 at 7:45am
| i use 4in. with flat washer and lock washer. 4 x 3/4 carage |
Posted By: Travis(NE)
Date Posted: 16 Jan 2012 at 8:13am
If your going to hang two weights on each side you will need 4 of the 3/4"X4" carriage bolts per side, so 8 total. Use 2 per weight and don't forget to put the bolts through the first weight before you put it on the rim, or you will have to take it back off. Don't ask how I know this... Not a good close up picture, but here is two weights on my early 17.
|
Posted By: DOlson
Date Posted: 17 Jan 2012 at 8:09am
| Thanks for the reply's just wanted to order the correct bolts |