Farm Equipment - 6060-6080 cab interior kits?

Print Page | Close Window

6060-6080 cab interior kits?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43857
Printed Date: 22 May 2025 at 12:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6060-6080 cab interior kits?

Posted By: rupp_centaur
Subject: 6060-6080 cab interior kits?
Date Posted: 15 Jan 2012 at 8:10pm

Hi all and thanks for trying to answer my question. We are in need of a cab interior for the 6080 on the farm. It is doing the usual after 20 years and starting to fall down and apart. My question is where is a good place to buy a good kit. I would rather pay some more and get more of a custom fit than just a can of spray glue and a stack of interior foam thats need to be cut:)

Let me know what is out there and where and what everyone has had the best luck with.

Thanks !!

Don

Replies:

Posted By: AllisFreak MN
Date Posted: 15 Jan 2012 at 8:52pm

K&M manufacturing makes an excellent kit. They are a little pricey but they are worth it for the fit & finish.

-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2

Posted By: Russ-neia
Date Posted: 15 Jan 2012 at 9:17pm

K & M or Fehr Cab kits are both good.

http://www.fehrcab.com/kitdetail.asp?id=AC6060L" rel="nofollow - http://www.fehrcab.com/kitdetail.asp?id=AC6060L

-------------
The innovators offer what others will imitate.

Posted By: Eric in MN
Date Posted: 16 Jan 2012 at 6:37am

hello Don,
I just finished putting in new cab interier, headliner and floor mat in my 6080, I got materials direct from Fehr cabs they are the suppliers for the kits when ordered though the Agco heritage line. I was very pleased with the fit and finish of the product.
Hope this helps

-------------
CA,WD45,D-17DII,175D,6080

Posted By: AC200Puller
Date Posted: 16 Jan 2012 at 9:00am

K&M makes a good fitting one . I have used them for the 6 , 7 ,and 8000 series tractors .

Posted By: rupp_centaur
Date Posted: 16 Jan 2012 at 8:58pm

thanks for the help guys!!