CA mounted cultivator parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43769
Printed Date: 09 Sep 2025 at 7:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA mounted cultivator parts
Posted By: sparky
Subject: CA mounted cultivator parts
Date Posted: 14 Jan 2012 at 3:55pm
|
In search for the ram extension for my CA cultivators. In the manual it is #16 on page 5 figure #6. I also need the rear cultivator depth stop #37 figure 12 on page 7. This stop is also at the top of page17. Looking for the 2 wedge pins on page 5, figure 4 #12. I think I've got this correct???? Thanks in advance. ------------- It's the color tractor my grandpa had! |
Replies:
Posted By: Jim-Ohio
Date Posted: 15 Jan 2012 at 6:18am
|
Good luck. I haven't had any success finding the rear depth stop either. Someone posted pictures and measurements when I asked about it in the past. I still may just have one made at a machine shop. ------------- '61D17, '51WD, '51CA, '41C, '49C, Woods 5'&6'Mower, 6'Blade, CA-Plow, CA-Cultivator, 3-Btm snap-coupler plow, 4-row planter, WD 4-row cultivator, 80R mower,#7 mower,B/C mower |
Posted By: Flint23
Date Posted: 17 Jan 2012 at 4:53pm
|
the depft stop is made from 3/4'' rod and is about 28 1/2'' long,it also has a collar that fits over it, I'll try and get a pic of it this wk. I also need to make the angle iron piece that bolts to the tractor. ------------- been there done that, not doing it again... |
Posted By: Matt (Jordan,MN)
Date Posted: 19 Jan 2012 at 12:27pm
| I have a ram extension that i wll sell. Send me a PM or email me at mailto:mbscott881@hotmail.com" rel="nofollow - mbscott881@hotmail.com if your still looking. Thanks Matt |
Posted By: CTuckerNWIL
Date Posted: 19 Jan 2012 at 1:56pm
|
I think a Morse taper drift will work for the wedge pin but I'm not sure what size you would need. http://www.google.com/products/catalog?q=morse+taper+drift&hl=en&client=firefox-a&hs=MTe&rls=org.mozilla:en-US:official&prmd=imvns&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1024&bih=612&um=1&ie=UTF-8&tbm=shop&cid=15558126281392387122&sa=X&ei=3HQYT4bxC5GK2QXBuPD5Cw&ved=0CGMQ8wIwAA" rel="nofollow - http://www.google.com/products/catalog?q=morse+taper+drift&hl=en&client=firefox-a&hs=MTe&rls=org.mozilla:en-US:official&prmd=imvns&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1024&bih=612&um=1&ie=UTF-8&tbm=shop&cid=15558126281392387122&sa=X&ei=3HQYT4bxC5GK2QXBuPD5Cw&ved=0CGMQ8wIwAA
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Flint23
Date Posted: 20 Jan 2012 at 1:12pm
Here's the pic of the depth rod... ------------- been there done that, not doing it again... |
Posted By: Travis(NE)
Date Posted: 20 Jan 2012 at 9:06pm
| The depth rod looks like the same thing a two row front mount for the WD's used on the left side in place of where the ram would go... |