Farm Equipment - WD45 flywheel

Print Page | Close Window

WD45 flywheel

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43735
Printed Date: 08 Sep 2025 at 8:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 flywheel

Posted By: Matt MN
Subject: WD45 flywheel
Date Posted: 13 Jan 2012 at 9:53pm

I am going to have a flywheel resurfaced on a WD45, what it the demension that the "step" need to be between the disk surface and where the pressure plate bolts to?

-------------
Unless your are the lead horse the scenery never changes!!

Replies:

Posted By: Gary in da UP
Date Posted: 14 Jan 2012 at 5:15pm

Matt, simply remind your machinest that whatever material he removes to true the face , he also needs to take a like amount from the plate mounting surface as well. If he has any experience at all, he has seen it all before. I have scanned all my manuals and could not find the exact dimension. At least your bumped up and some one who knows may reply.

hth , Gary

Posted By: Matt MN
Date Posted: 15 Jan 2012 at 7:44pm

I wish it were that easy, I believe the one I have has been machined incorrectly but I cant find the tolerance in any of my books.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Bruce Nelson
Date Posted: 16 Jan 2012 at 7:41am

Dimension is 1.188"