Farm Equipment - 226 combine engine into a wd45

Print Page | Close Window

226 combine engine into a wd45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43724
Printed Date: 21 Aug 2025 at 6:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 combine engine into a wd45

Posted By: farmer_rob
Subject: 226 combine engine into a wd45
Date Posted: 13 Jan 2012 at 8:07pm

i can get a complete 226 out of a combine but i was wondering what all i need and or change to get it to run.. i know ill need the gov off the tractor plus the bell housing.. anything esle needed or missed

-------------
if farming was easy everybody would be doing it

Replies:

Posted By: norm[ind]
Date Posted: 13 Jan 2012 at 8:12pm

change gov. setup--wAter pump--carb linkage-throttle shaft or put the one from tractor---done many 1-574-342-4545

Posted By: BennyLumpkin
Date Posted: 13 Jan 2012 at 10:19pm

The whole front plate is what I understand needs changed over. The bellhousing isn't different. 201's and 226's all have the same bolt pattern. Pretty straight forward swap.

-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110

Posted By: Carl(NWWI)
Date Posted: 13 Jan 2012 at 11:12pm

You will have to grind some off the frame rail for the governor casting on the block. Be the right side of the block, it'll hit the frame, grind like a 1/8-1/4 off and as wide as the casting.

Carl