Farm Equipment - d17 tires

Print Page | Close Window

d17 tires

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43674
Printed Date: 01 Oct 2025 at 7:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d17 tires

Posted By: donais
Subject: d17 tires
Date Posted: 12 Jan 2012 at 10:31pm

i currently have 18.9x28 tires on this ans i found some almost new 14.9x28 tires for 100 each will they fit on this rim? the rim is @ 14.5 to 15 inches wide. thanks jon

Replies:

Posted By: Jim Hancock
Date Posted: 12 Jan 2012 at 10:33pm

Yes, they will fit.

Posted By: donais
Date Posted: 12 Jan 2012 at 10:43pm

sweet, also does anyone have a pic of where the steering shaft goes into the bell housing on a diesel i need to make a bushing!!

Posted By: D-17_Dave
Date Posted: 12 Jan 2012 at 10:48pm

There is supposed to be a support bushing bearing bolted inside of the left frame rail with 1 bolt just in front of the bell housing. This takes care of supporting the rear section of the shaft. This is likely worn and is letting the shaft rub the bell housing.

-------------
Yea, I can fix that.....

Posted By: donais
Date Posted: 12 Jan 2012 at 11:45pm

cool thanks i saw that in there guess i get to adjust it

Posted By: David Maddux
Date Posted: 13 Jan 2012 at 5:10am

On the D-17 diesel that I am currently restoring, the shaft and support bearing block was worn. I cut the worn part of the shaft out, drilled, pinned , welded and turned the shaft new, then we made a new support block with a brass wear bushing.Also drilled and tapped the block for a grease zerk. She won't wear out again in my ownership life. Dave.