What model fender is this? XT new to me
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43420
Printed Date: 05 Sep 2025 at 7:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What model fender is this? XT new to me
Posted By: Leon B MO
Subject: What model fender is this? XT new to me
Date Posted: 08 Jan 2012 at 5:53pm
|
Here is a 69 XT I bought today, seems to be very sound mechaniclly. I couldn't get it to pop out of any gear, 4793 on a working tach. Absolutely no noticable wear on the foot pedals. It was about 30 degrees out last night and after using the glow plugs for 45 seconds it turned over fast and started after about 6 revs with very little smoke. Front tires are "Maypops", 34" rears are good but mismatched, no fluid in tires so rims look very good. Not a single weld or break anywhere on loader, 6' bucket, the steering and front end are very tight. It needs some miner parts, handles, top link, seat, console door and placard, hyd hoses and a few leaks fixed. Might need a clutch in a couple years. Brakes are wet and need inner seal replaced. The paint on the loader is poor but the tractor itself is not that bad. Sheet metal is fair but the fenders are not like any 190 fenders I've seen. Can someone tell me if they for sure belong on a 190 or are they off a D21, 210, 220. They are taller, no stiffeners, no grab hole, the driver fender has a notch that is bolted to battery cover and they are rounded over the top of tire. Thanks for any info.    ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Replies:
Posted By: JOHN N/IL
Date Posted: 08 Jan 2012 at 6:23pm
| I dont know about the fenders but i like your tractor .Was this at a auction?. |
Posted By: Leon B MO
Date Posted: 08 Jan 2012 at 6:28pm
|
No I bought it from an Individual. ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: ILGLEANER
Date Posted: 08 Jan 2012 at 6:32pm
|
Leon they are off of a 6080 or they might be off of a 7000 series open station. But the pto sticker on there tells me its off of the 6060/6080. IG ------------- Education doesn't make you smart, it makes you educated. |
Posted By: Leon B MO
Date Posted: 08 Jan 2012 at 6:45pm
|
IG, you know I thought about you as soon as I saw the fenders were wrong, you don't have a set just sitting around for sale do ya. Ones that came off a 200 would work, I'm kickin myself now.
Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: ILGLEANER
Date Posted: 08 Jan 2012 at 6:52pm
|
I know what you mean Leon. No I dont but I will keep my eyes open. IG ------------- Education doesn't make you smart, it makes you educated. |
Posted By: Orange Blood
Date Posted: 08 Jan 2012 at 7:20pm
|
What is the lever there in the last picture, going down to near the rear of the floor. Our 190xt Series III doesn't have it??? ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: Leon B MO
Date Posted: 08 Jan 2012 at 7:24pm
|
PTO for 190's and 200's that have the single speed 540, not the hyd 2 speed pto ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: Orange Blood
Date Posted: 08 Jan 2012 at 7:26pm
OK makes sense. Both ours and my late grandpas had hydraulic PTOs Thanks ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Leon B MO wrote:Posted By: Leon B MO
Date Posted: 08 Jan 2012 at 7:52pm
|
Looks like IG hit it on the head. I looked at some 6080's on Tractor House and they have the curved radius above the tire, the left fender on the 6080 appears to have the same support brace that I have and it looks like there is no grab hole on the 6080, Sooooooooooo, looks like I might have a set of 6080 fenders for sale or trade for a pair of 190, 200 fenders. Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: HARVESTMOONPULLER
Date Posted: 08 Jan 2012 at 8:07pm
|
Posted By: Darrell G (MN)
Date Posted: 08 Jan 2012 at 8:48pm
| Leon, I have a pair of 190 fenders that I would sell, let me know if you are interested |
Posted By: HagerAC
Date Posted: 08 Jan 2012 at 8:53pm
|
I've also got a set of fenders here off of a 69, were only on the tractor 4 years of its life. PM me if interested. ------------- 30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52 |
Posted By: MBwcIll
Date Posted: 08 Jan 2012 at 8:59pm
|
Our new 1974 200 had the two speed pto leaver on the console. We later bought a 1975 200, used, to have in our collection. It has the single speed pto leaver on the left floor like the above picture. In 1967 the 190 changed from a very short knob on the floor to the tall leaver to engage the pto. |
Posted By: Leon B MO
Date Posted: 08 Jan 2012 at 9:21pm
|
Thanks for the offers, I will be in touch. By the way I'm not in a big hurry for them. I've got a WD to put back together first. I'm not gonna paint the XT, it's gonna be a workhorse........well maybe someday........... well I might try to fix it up over the next couple years.............OK next winter! My lovely wife doesn't even know I got it yet, Shhhh.
Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: Orange Blood
Date Posted: 08 Jan 2012 at 9:41pm
Well Leon, if you need a place to stay, Colorado is lovely any time of year my friend. We Allis Addicts need to take care of each other.!! :-) ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: injpumpEd
Date Posted: 08 Jan 2012 at 9:48pm
|
the pto lever is just a mechanical engaged gear, have to stop and shift into gear. The ones on the side of console have a hydraulic clutch pack to be able to engage anytime. I dont think dual speed pto's are all hyd clutches. two completely different options.
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: kffischer
Date Posted: 08 Jan 2012 at 10:33pm
|
To me the fenders are reminiscent of Ford flat tops from mid seventies thru nineties. Maybe they are an aftermarket repop in that style meant to fit anything? karl f
|