D19 brakes
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43354
Printed Date: 03 Sep 2025 at 7:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 brakes
Posted By: ChuckLuedtkeSEWI
Subject: D19 brakes
Date Posted: 07 Jan 2012 at 9:12am
Since I didn't get the brakes adjusted last week up to snuff, I decided to take the cover off of the left side which wasn't working as good. Found out I have a couple problems in there. The seal on the bull pinion shaft is leaking, so all of the brake components are gummed out with gearlube. Second, the steel balls and the springs are all missing. So the only braking that was going on was the band and the discs weren't doing anything. Can I get any of the balls and springs from any vendors on here, or do I have to go to AGCO. Also, the band pads are down to about an 1/8" on both sides. The disc pads are about 3/16". The ones that are all gummed out, can I clean them good and they should be ok, or should I replace them as they're impregnated with oil in the pads. Also, what thickness are the band brake pads when new, as they do look worn some? I am going to go this morning and pick up new seals for both sides, as one is leaking already so I might as well do both sides as it is all apart. When I get back I will post some pictures of what I have found so far.
-------------
1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221
|
Replies:
Posted By: Bill Deppe/AC Salvag
Date Posted: 07 Jan 2012 at 11:10am
|
Would have the steel balls available Ia 563 652-2949
|
Posted By: David(Stockbridge)MI
Date Posted: 07 Jan 2012 at 12:13pm
Have the disk pads and the drum pads in stock. David djstractorparts 734-320-3470
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
Posted By: Rick
Date Posted: 07 Jan 2012 at 5:10pm
|
Both,the brake bands and the disc brakes should have 3/16" facing. Rick
|
|