Farm Equipment - D17 Oil Pan Gasket

Print Page | Close Window

D17 Oil Pan Gasket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43261
Printed Date: 03 Sep 2025 at 6:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Oil Pan Gasket

Posted By: bincitybandit
Subject: D17 Oil Pan Gasket
Date Posted: 05 Jan 2012 at 9:52am

About to install pan gaskets for the SECOND TIME IN A MONTH. After careful review of this site I think the failure of the first set I put in was apparently because I cut the end gaskets because they look just too darned long to me the first time, and I didn't install the L gaskets.

My question now is my new set of gaskets that Sandy Lake Imp sent me are of the A&I variety. There are two sets of end gaskets included, one set is about 1/16" narrower and 1/4" shorter. Which one am I supposed to use?

-------------
ALLIS: B, WC, G, G, D10, D12, D14, D14(NF), D15, D17, D17(NF), D19, D21, D21
MINNEAPOLIS MOLINE: U, U, U(NF), GB
JOHN DEERE: L
FORD: 871 Select-O-Speed
CASE: 600 Combine

Replies:

Posted By: MACK
Date Posted: 06 Jan 2012 at 7:36am

Never used one from A&I but I would use the longer and widest. MACK

Posted By: Orange Blood
Date Posted: 06 Jan 2012 at 6:03pm

Are you talking about the rear main seal? The thicker grey ones are what you use, leave out the white ones.

Take some pictures if that isn't what you are asking?

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7