D-14 with factory 3 pt hitch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43148
Printed Date: 03 Sep 2025 at 3:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-14 with factory 3 pt hitch
Posted By: Charlie (NC)
Subject: D-14 with factory 3 pt hitch
Date Posted: 02 Jan 2012 at 3:17pm
I bought a D-14 about 15 years ago that has what I believe to be a factory 3 pt hitch. I'm pretty sure AC never made a 3pt hitch D-14 so I have to assume that someone has transplanted D-15 parts on to it. Can anyone tell me what to look for in the way of casting numbers, etc? I've attached a picture.
|
Replies:
Posted By: Larry B
Date Posted: 02 Jan 2012 at 4:09pm
| looks like an aftermarket setup. |
Posted By: TerryMN
Date Posted: 02 Jan 2012 at 4:35pm
| its factory off of a D15 |
Posted By: Burgie
Date Posted: 02 Jan 2012 at 4:36pm
|
Looks like a D15 factory. ------------- "Burgie" |
Posted By: Charlie (NC)
Date Posted: 02 Jan 2012 at 6:21pm
| Thanks guys. That is what I was thinking. I knew it was factory because I've seen similar rigs on other AC stuff AND the traction booster works with it. |
Posted By: DSeries4
Date Posted: 02 Jan 2012 at 10:30pm
|
D14s were not offered with a factory 3 point. But I agree with the others that it is a factory 3 point from a D15 on your tractor. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Charlie (NC)
Date Posted: 03 Jan 2012 at 6:04am
|
Thanks DSeries, I was pretty sure that was what it is before I asked but wanted to make sure. I think we have a consensus. I will say that if any of you have a D-14 and have the spare parts from a D-15 to make the conversion, it sure does work nice! I've got another D-14 with the factory 3 pt adapter kit that fits into the snap couple bell on it and there is no comparison between the two in ease of use. The D-15 3 pt wins hands down. Of course I can't use Snap coupler implements on this tractor but that's ok. A lot of my stuff is 3 pt anyway. |