Got a Question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43045
Printed Date: 31 Aug 2025 at 7:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Got a Question
Posted By: SteveMaskey(MO)
Subject: Got a Question
Date Posted: 31 Dec 2011 at 3:41pm
| Will a 190 3pt. hitch work on a D17 IV? The 17 has a snap hitch and they want to change it to a 3pt. |
Replies:
Posted By: Rick
Date Posted: 31 Dec 2011 at 6:16pm
| Steve, I'm not sure about the 190 working on a D17 Series IV,but it will work on a D19. I do believe there is a difference,but I could check that for you tomorrow,if you want? I have a factory three point setup on a D19 and a snap coupler off a D17 Series IV that I could measure the rear lift housing and see if they would bolt up. I'll be in touch,Steve. Rick |
Posted By: Skyhighballoon(MO)
Date Posted: 31 Dec 2011 at 6:57pm
|
Steve - won't bolt up as the rear housings are completely different. There may be some parts on the lift arms/lift links on a 190 that are the same but that's about it. 170/175/180/185 3 point will bolt right up. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Rick
Date Posted: 31 Dec 2011 at 7:07pm
| Mike...that's exactly what I was thinking. If I remember correctly,I checked all of this out 4-5 years ago and it didn't work then either! LOL! You guys have a Happy New Year!!! Rick |
Posted By: norm[ind]
Date Posted: 31 Dec 2011 at 7:11pm
| have 190 3 pt. for sale 1-800-254-3116 wrong section sorry |
Posted By: SteveMaskey(MO)
Date Posted: 01 Jan 2012 at 6:24am
| Thanks Rick and Mike for the information. Thats what I told him and just wanted to be sure I was correct. I know my brother tried to put a 180 3pt on a D19 and the top part worked but the bottom part would not bolt up. Thanks again. Steve |
Posted By: DrAllis
Date Posted: 01 Jan 2012 at 8:11am
| I've never done this, but always thought there was a possible way to make the wider (D19-190) hitch work on a narrow (D17-170-180) rearend housing. I believe you could manufacture two spacer plates one inch thick to mount to the rearend and then have a second set of holes to line up with the hitch itself. It would require some threaded holes in this plate and some countersunk holes for others. Only downside I can see is the hitch would be located one inch further rearwards from where it normally is, which wouldn't bother anything. Something to maybe consider ?? |
Posted By: Jeff Z. NY
Date Posted: 01 Jan 2012 at 8:18am
|
As Posted:
Got a Question You too!!! My whole life is one big question. 
------------- I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions} |