190XT III Tachometer gears needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42993
Printed Date: 31 Aug 2025 at 7:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT III Tachometer gears needed
Posted By: Reed(UT)
Subject: 190XT III Tachometer gears needed
Date Posted: 30 Dec 2011 at 5:14pm
|
Does anyone know where I could find the gears for the back-side of the alternator for the tachometer for a 190XT III?
Thanks
Reed
-------------
2 WD45s, 190XT III, 72 AllCrop, Bunch of snap-coupler stuff. Looking for a B and CA
|
Replies:
Posted By: Ky.Allis
Date Posted: 30 Dec 2011 at 5:41pm
|
You can get the entire drive assembly from AGCO in their Heritage parts catolag. They do not offer just the gears,but I wouldn't think it would cost all that much,but you never know. Part#----70246764V
|
Posted By: HagerAC
Date Posted: 30 Dec 2011 at 11:23pm
From what I have been told, the drive assembly has the incorrect gear in it, so they do not read correctly. I have been looking high and low for one for my 180 also. There was talk of agrimson tool company making a correct tooth gear out of steel.
-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52
|
Posted By: XT in pa
Date Posted: 31 Dec 2011 at 12:08am
i got the fiber gear in 05 when i got my xt and it was 45$ then Shawn
-------------
190XT,D17and 7045
|
Posted By: David(Stockbridge)MI
Date Posted: 31 Dec 2011 at 5:25am
|
NLA, I have the small factory gears in stock, but can not find the fiber one. David http://www.djstractorparts.com - www.djstractorparts.com
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
Posted By: ScooterBuck
Date Posted: 31 Dec 2011 at 6:46am
My 190XTIII tach goes up to about 2500 just a little off of idle. Any idea what would be causing that?
|
Posted By: REEDE
Date Posted: 31 Dec 2011 at 10:17am
|
The complete tach drives are no longer avaible from AGCO for the ALLIS CHALMERS tractors, but the small gear and fiber gear are avaible for the MASSEY FERGUSON tractors . The 1100 MASSEY FERGUSON uses this set up, the rpms will be off a little.
|
Posted By: JOHN N/IL
Date Posted: 31 Dec 2011 at 8:25pm
|
A guy in nebraska sells them for 56 dollars i didnt buy one too high i thought.I just missed one on ebay nos for 26 dollars.IF you want the guys number i'll get it on here
|
|