Print Page | Close Window

7000 hydraulic pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42872
Printed Date: 19 Aug 2025 at 2:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 7000 hydraulic pump
Posted By: Andrew(southernIL)
Subject: 7000 hydraulic pump
Date Posted: 28 Dec 2011 at 5:04pm
Been having to bleed the pump everytime we start the tractor (maroon belly). Doesn't take much just crack open one line at the pump and wait a few seconds then tighten back up. Any ideas on possible cause. 

-------------
If fishing is a sport your looking at an athlete



Replies:
Posted By: MACK
Date Posted: 28 Dec 2011 at 9:39pm
Front seal in pump needs replaced or hose clamps on suction hose needs tightened.  MACK


Posted By: Hurst
Date Posted: 28 Dec 2011 at 10:23pm
Also could be the doughnut gasket on the suction line at the sump.  But usually that will be a dripping leak there.  Someone on here once said they had a pin hole in the elbow suction hose at the pump.
 
Hurst


-------------
1979 Allis Chalmers 7000
5800 Hours



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net