Farm Equipment - PLOW CUTTER ?

Print Page | Close Window

PLOW CUTTER ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42277
Printed Date: 18 Jun 2025 at 12:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: PLOW CUTTER ?

Posted By: ctbowles58
Subject: PLOW CUTTER ?
Date Posted: 17 Dec 2011 at 2:01pm

ON a plow That has the rolling cutters with a bushing in the hub what would work for a new bushing? mine is on a 2000 series plow it has a 5/8 hole for the bolt can you still get these from AGCO ? or is there some kind of pipe you can make one out of? it is hard to find pipe with an ID if 5/8 in.Thanks for any ideals TOM.

Replies:

Posted By: Gerald J.
Date Posted: 17 Dec 2011 at 3:05pm

Steel selling shops have bushing stock that is a hair undersize on the inside and a hair oversize on the outside so it can be turned to the exact size.

Those coulter bushings are probably in the plow bottoms and coulters book at
http://www.grandpastractor.com/phpBB3/index.php. Look at the coulter on page 27, its the only one in my printed copy of that book that has a 5/8" bolt. The bushing or bearing is 344227. I have no idea if AGCO still has any. It is like the coulter on my 2000 plow.

According to one handbook, 1/2" pipe is .003" under 5/8" ID. WIth there often being a weld seam it would take running a 5/8" drill through to get it up to clearance on a 5/8" bolt (axle). Or with a metal lathe its not beyond reason to start with a solid rod and bore it out.

Gerald J.

Posted By: Tracy Martin TN
Date Posted: 17 Dec 2011 at 7:46pm

Tom , probably can buy an 841 bronze, Oil-Lite bushing from McMaster Carr. Probably can buy exact size you need. HTH Tracy Martin

-------------
No greater gift than healthy grandkids!

Posted By: ctbowles58
Date Posted: 17 Dec 2011 at 8:20pm

THANKS TRACY

Posted By: Chalmersbob
Date Posted: 17 Dec 2011 at 10:06pm

My book is showing a bearing and bearing cup for the 2000 coulter. A very common tube type bearing seems to be a 317992. Bob

Posted By: Gerald J.
Date Posted: 17 Dec 2011 at 11:22pm

Yes 317992 is in my book many times, but it won't fit a 5/8" bolt when its made for a 1/2" bolt that accompanies it in all those pages.

Gerald J.

Posted By: CTuckerNWIL
Date Posted: 18 Dec 2011 at 8:47am

McMaster Carr has ASAE 660 (932 alloy) bronze which would do just fine as long as you grease it once in awhile.

For Shaft Dia.: 5/8"
3/4"	1/2"	http://www.mcmaster.com/#6381K141 - 6381K141	1.83
3/4"	5/8"	http://www.mcmaster.com/#6381K53 - 6381K53	5.13
3/4"	3/4"	http://www.mcmaster.com/#6381K531 - 6381K531	2.03
3/4"	7/8"	http://www.mcmaster.com/#6381K532 - 6381K532	5.85
3/4"	1"	http://www.mcmaster.com/#6381K533 - 6381K533	2.46
3/4"	1 1/8"	http://www.mcmaster.com/#6381K534 - 6381K534	2.42
3/4"	1 1/4"	http://www.mcmaster.com/#6381K535 - 6381K535	2.85
3/4"	1 1/2"	http://www.mcmaster.com/#6381K536 - 6381K536	3.11
3/4"	3"	http://www.mcmaster.com/#6381K6 - 6381K6	10.02
13/16"	1/2"	http://www.mcmaster.com/#6381K537 - 6381K537	5.50
13/16"	3/4"	http://www.mcmaster.com/#6381K538 - 6381K538	6.01
13/16"	1"	http://www.mcmaster.com/#6381K539 - 6381K539	3.32
13/16"	3"	http://www.mcmaster.com/#6381K7 - 6381K7	10.50
7/8"	5/8"	http://www.mcmaster.com/#6381K54 - 6381K54	5.94
7/8"	3/4"	http://www.mcmaster.com/#6381K541 - 6381K541	2.98
7/8"	1"	http://www.mcmaster.com/#6381K542 - 6381K542	3.50
7/8"	1 1/2"	http://www.mcmaster.com/#6381K543 - 6381K543	6.04
7/8"	1 3/4"	http://www.mcmaster.com/#6381K544 - 6381K544	5.74
7/8"	3"	http://www.mcmaster.com/#6381K8 - 6381K8	10.94
1"	3/4"	http://www.mcmaster.com/#6381K545 - 6381K545	6.97
1"	2"	http://www.mcmaster.com/#6381K151 - 6381K151	6.21
1"	3"	http://www.mcmaster.com/#6381K9 - 6381K9	11.90
1 1/8"	1 1/2"	http://www.mcmaster.com/#6381K161 - 6381K161	6.73

Here is the page.
http://www.mcmaster.com/#sae-660-bronze-bushings/=fezxhn - http://www.mcmaster.com/#sae-660-bronze-bushings/=fezxhn
You should be able to pick something up at your local bearing supply store.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF