Print Page | Close Window

AC D14 Starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42246
Printed Date: 30 Aug 2025 at 6:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC D14 Starter
Posted By: dishinhof
Subject: AC D14 Starter
Date Posted: 16 Dec 2011 at 8:05pm
My starter just spins without making contact. When i had the starter out, it looked liked it was not extending all the way. Is this common problem?



Replies:
Posted By: ctbowles58
Date Posted: 16 Dec 2011 at 8:25pm
SOUNDS LIKE A BROKEN SPRING IN THE STARTER DRIVE.


Posted By: Charlie (NC)
Date Posted: 16 Dec 2011 at 8:27pm
Not necessarily a common problem but it happens with starters of all makes.  Does the starter motor seem to be turning up to full speed?   If yes then the problem is probably in the starter drive.   Might be time for a trip to the startern/generator shop.


Posted By: Chalmersbob
Date Posted: 16 Dec 2011 at 9:51pm

The Bendix may just be stuck. Had that happen on my D14. Just pull the motor and check it. Bob



Posted By: DSeries4
Date Posted: 16 Dec 2011 at 11:05pm
I vote for the spring on the starter...

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: dishinhof
Date Posted: 17 Dec 2011 at 12:31am
Thanks. i thought i might have to replace the drive. I'll let you know what happens after i replace it.



Posted By: Gary
Date Posted: 17 Dec 2011 at 8:32am
Is your battery a 6 volt  or  12 volt?
 
Gary



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net