PART #344186 ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42236
Printed Date: 29 Aug 2025 at 8:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: PART #344186 ?
Posted By: ctbowles58
Subject: PART #344186 ?
Date Posted: 16 Dec 2011 at 2:29pm
|
NOS PLOW SHARES THAT I HAVE PART # 344186 CAN ANYONE TELL ME WHAT THAY FIT.? I THINK A 70s ser. plow but not sure thay are 4 hole 14in. THANKS TOM
|
Replies:
Posted By: MNLonnie
Date Posted: 16 Dec 2011 at 2:39pm
My book just says blade MP (moldboard plow), no other info.
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: ctbowles58
Date Posted: 16 Dec 2011 at 4:26pm
Posted By: Rfdeere
Date Posted: 16 Dec 2011 at 4:53pm
Share 344186 will fit 14" right hand bottoms 371, 372, and 373. has 4 bolt holes. NO. 60, 70, 80 and 9000 series plows.
-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
Posted By: Gerald J.
Date Posted: 16 Dec 2011 at 7:52pm
Plow models and plow bottoms are totally independent. Most every AC bottom will fit every frame model. A model 70 will take at least 8 or 10 different bottoms. They are covered in separate parts books.
338010 will probably fit and a 344865 share WILL fit. That last number is described as "Economy Type." And since all sizes and all variations in the 371, 372, and 373 use the same frog, its sure the 12 and 16" shares will fit also. The 4th or 5th hole goes to a strap to the back lower corner of the moldboard. Three bolts go into the frog.
The differences between these three bottoms is in the moldboard and moldboard brace, not anything else.
A 16" share on a 14" plow should work just fine since the extra length of the share is in the previous furrow. 16" R.H. shares are 337848, 344190, 344866, and 349031. A 12" share may work on a 14" bottom though it may not cut as well.
Gerald J.
|
|