Farm Equipment - wd hand clutch seal

Print Page | Close Window

wd hand clutch seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42033
Printed Date: 21 Aug 2025 at 10:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd hand clutch seal

Posted By: gman11110
Subject: wd hand clutch seal
Date Posted: 12 Dec 2011 at 7:35pm

the hand clutch seal is leaking on my 49 wd. i have the engine out right now. whats the best way to get to it. any info is appreciated

Replies:

Posted By: norm[ind]
Date Posted: 12 Dec 2011 at 8:12pm

pull the next casting an replace it

Posted By: Butch(OH)
Date Posted: 12 Dec 2011 at 8:24pm

Which one? If your talking about the input shaft seal between the hand clutch and hydraulics you need to do as Norm advised, pull the next casting foreward, the hydraulic tank. Symtom of this one is your hydraulic oil seeks the level of the trans/rearend oil. Some have been "fixed" by running hy/tran oil in everything and lettting it go where it wants to. I dont remember there being any hidden tricks to doing it but there is an old update to a dual seal which is all you can get now and there is a wear sleeve that you must have to use it.

Posted By: gman11110
Date Posted: 13 Dec 2011 at 7:16pm

the seal that is leaking is on the side behind the brake pedals. it is where the lever for the hand clutch goes into housing???