AC 2 row planter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41945
Printed Date: 29 Aug 2025 at 10:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 2 row planter
Posted By: eccosten
Subject: AC 2 row planter
Date Posted: 11 Dec 2011 at 10:27am
| I need help with my planter. I just picked up an Allis 2 row planter. I will post pictures shortly, but from what I can tell I need 2 leveling arms for the unit. The arm that comes out to connect to the snap coupler on the tractor has a pin going across the front that is spring loaded. 2 pieces of metal run parallel to the tractor and the pin is going across these pieces. I attempted to hook up the planter, but the bars are too short. How do I properly modify the planter to fit my D 10? Thank you, Ean. |
Replies:
Posted By: Wil M (NEIA)
Date Posted: 12 Dec 2011 at 6:15am
|
Pictures would be great so that we could help you out.
Wil ------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: JoeO(CMO)
Date Posted: 12 Dec 2011 at 7:31am
|
From your description, it could be a wc, wd hitch which would use the drawbar to complete. Later Snap Coupler hitch eliminated the two piece with a one piece tongue, had better control of the planter and is a direct bolt on replacement. ------------- |
Posted By: eccosten
Date Posted: 12 Dec 2011 at 2:33pm
|
Posted By: ctbowles58
Date Posted: 12 Dec 2011 at 5:20pm
| you take the draw bar from your tractor and slide it in the track there is a place for a hitch pin and the front pin goes over your draw bar it will work with pin hitch or S/C eaither one . |