Farm Equipment

Print Page | Close Window

190XT

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41745
Printed Date: 28 Aug 2025 at 11:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190XT

Posted By: Carl(NWWI)
Subject: 190XT
Date Posted: 06 Dec 2011 at 7:38pm

The 1st, 2nd, and 3rd gears, along with the 1st and 2nd sliding gear and collars on the main shaft, including input shaft, are shot on my 190xt, priced a bunch of items out,(more then trans parts) and the quote came back at $4500. My jaw was dragging on the ground at the point. Where is the best place to get aftermarket trans parts, are they reliable, and will they hold 300hp?

Thanks, Carl

Replies:

Posted By: DougG
Date Posted: 06 Dec 2011 at 8:12pm

Ebay has some listed, Antuiquetractor.com , aftermarket suppliers , A+i have them , personally I wouldnt put that much money in one , 4500 bucks anyway , sometimes you can find the back half of a blownup tractor too , but then you have to wonder what the guts look like - I have never heard anything bad about the cheaper stuff , have used some parts and had good luck with them

Posted By: Joe(TX)
Date Posted: 06 Dec 2011 at 9:01pm

At much less than that price you can buy a parts tractor. I paid $1000 for one. There are differances in the transmissions between series.

Check with some of the people that advertise here. Most sell parts from A&I products.

OK Tractor is a good place to start.

I have had good results from Worthington Ag although they do not advertise here.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: HagerAC
Date Posted: 06 Dec 2011 at 9:18pm

Well there is that 190 xt down here is River Falls with that blown motor in it. Not sure how long it has been sittin, may have good parts in it, might not.

-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

Posted By: ctbowles58
Date Posted: 06 Dec 2011 at 10:23pm

my son rebult the trans in mine last winter we got some gears and shafts from stiner and the rest from A&I Total spent on parts a ittle less then 1000.00 labor was free thanks to my son.