Farm Equipment - Tie rod ends for 1963 d19

Print Page | Close Window

Tie rod ends for 1963 d19

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41286
Printed Date: 28 Aug 2025 at 11:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Tie rod ends for 1963 d19

Posted By: Hunttractor
Subject: Tie rod ends for 1963 d19
Date Posted: 28 Nov 2011 at 8:33pm

Replies:

Posted By: Tim-tn
Date Posted: 29 Nov 2011 at 11:04am

Abilene Machine has the complete tie rod assemblies for around $45 plus shipping.

Posted By: Slade (TN)
Date Posted: 29 Nov 2011 at 11:53am

Or any of your local dealers that sell for A&I....same price, have used/ sold bunches of them.....

Slade

Posted By: REEDE
Date Posted: 29 Nov 2011 at 8:10pm

AGCO part numbers are 70250150 and 70250151 .

Posted By: Hunttractor
Date Posted: 29 Nov 2011 at 10:01pm

Thanks guys. Is this something you think someone with a moderate mechanical knowledge can tackle? The farmer that I hunt on has the tractor and it needs this work done. Thoughts. Appreciate your help.

Posted By: m16ty
Date Posted: 29 Nov 2011 at 10:49pm

Do yourself a favor and buy one of those forked removal tools. You can get them out without it but it sure makes it easier.

They aren't too hard to change if they aren't rusted up where they go into the tie rod. I've had to heat them up pretty good with a oxy/acetylene torch to get them loose.