Small Allis Snowblower Help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41199
Printed Date: 29 Aug 2025 at 1:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Small Allis Snowblower Help
Posted By: Burnt Orange
Subject: Small Allis Snowblower Help
Date Posted: 27 Nov 2011 at 1:23pm
| I have a Allis Chalmers 416H with a front mount snowblower on it cant keep belts from turning over.The 6 inch idler v-belt pulley is shot and all I could find was a 5 inch last year.Hard to find with a bearing in them.Will look harder this year.I could realy use the proper belt length or a Allis or Simplicity belt number.Use a A60 to A66 belt now just TSC belts.Any help would be apreciated as the WD with plow is down for the count.Needs 2 rear tires ,one wheel and rt rear bearing plus seals.Could sure use a picture of the snow blower where it mounts to the 416H as not sure its original.I do not have a manual for the Blower.Thanks Brian PS:the Farmers Alimac and Inviroment Canada says We are going to get in Dec. |
Replies:
Posted By: jb from md
Date Posted: 27 Nov 2011 at 2:41pm
i just finished putting a snowblower on my 416-H. i understand there were two different models that fit the 416. its over at the farm and i could get some pics tomorrow night and post them up for you. this is the style blower that i have although this one is on a 312 its the same as the one i took off of a 416 to put on mine. if yours looks like this then i can help with belt numbers...Jb not mine------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Posted By: jb from md
Date Posted: 27 Nov 2011 at 3:12pm
here is another pic or two of the same type blower i found .it shows the mounting brackets. also not mine...Jb------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Posted By: Bob D. (La)
Date Posted: 28 Nov 2011 at 7:31am
|
Looks like an awful neat setup, though I sure hope I don't need one down here in Louisiana. LOL ------------- When you find yourself in a hole,PUT DOWN THE SHOVEL!!! |
Posted By: jb from md
Date Posted: 28 Nov 2011 at 8:34pm
here are the pics of the correct mounting brackets   please look past the rust,dirt,grease and poor paint. ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Posted By: Dakota Dave
Date Posted: 28 Nov 2011 at 8:42pm
|
You can go to simpletractors.com and find the belt lenght. you realy need to get a simplicity belt though. they are odd sized belts in 1/2 inch lenghts. My simplicity would eat belts like crazy until I got the correct one from the dealer. It lasted several years and is still on the blower. I just don't need it since I put a 6'6" blower on the WD45
.
Sorry I was Wrong the 416 dosen't cross to a Simplicity Model. If you have the Blower Model number you can still look it up there.
|