ED 40 tractor fenders.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41140
Printed Date: 29 Aug 2025 at 4:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ED 40 tractor fenders.
Posted By: skookumyeti
Subject: ED 40 tractor fenders.
Date Posted: 26 Nov 2011 at 11:05am
|
I have an ED 40 tractor I wish to restore.. However, it's missing its original fenders.. Does anyone out there happen to know where I can get a set of these?? I know they are extremely, if not almost impossible to find..I was informed by a gentleman from the UK that said he thought fenders off a D10 or a D12 might work in place of the originals.. Does anyone out there know what fenders may take the place of the originals, from other models, even if it comes close??, if so,, which one(s) would work and if they may be available somewhere.. Any help would be most appreciated..Thank you.. email; msa_telecaster@yahoo.ca |
Replies:
Posted By: JohnCinMd
Date Posted: 26 Nov 2011 at 4:01pm
Don't know if you need a picture of one with it's fenders, but thought I'd post it just in case... |
Posted By: Dave Everett
Date Posted: 26 Nov 2011 at 4:12pm
|
That would be me then! What the guy needs is a close up picture of ED40 fenders and D10 and 12 fenders to see if they are compareable.
|
Posted By: skookumyeti
Date Posted: 26 Nov 2011 at 7:49pm
| Thanx for the help here, guys.. I'm starting to find out that these old AC tractors are a passion for some people.. I think I may be hooked here as well !! Just a matter of time before something breaks here on this subject.. Thanx again, guys !! |
Posted By: acben20
Date Posted: 26 Nov 2011 at 8:22pm
| the fender you need is a d14 fender they are the same i think. |
Posted By: skookumyeti
Date Posted: 26 Nov 2011 at 8:55pm
| Thank you acben20..... I'll check it out.. even if they're close, I can modify the mounting points, (hopefully).. Thank you once again.. If anyone else has more info on this, please feel free to comment... |
Posted By: Dave Everett
Date Posted: 27 Nov 2011 at 6:09am
|
I had an i dea i was close, just wrong model sorry |
Posted By: skookumyeti
Date Posted: 27 Nov 2011 at 8:05am
| No problem, Dave.....I now have something to go on, thanx to you getting it started...A sincere thank you to you guys for helping me out here...... |
Posted By: Dave Everett
Date Posted: 28 Nov 2011 at 11:24am
| ED 40 parts for sale on Ebay.co.uk listed today |