Farm Equipment - 8070 shift cable high low and park?

Print Page | Close Window

8070 shift cable high low and park?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41135
Printed Date: 29 Aug 2025 at 12:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8070 shift cable high low and park?

Posted By: acben20
Subject: 8070 shift cable high low and park?
Date Posted: 26 Nov 2011 at 9:25am

the shift cable broke on our 8070 what is the best way to get at where it hook up to the trans under the cab. Is there a acsess panal under the seat? also any other tips would be great thanks ben~!

Replies:

Posted By: acben20
Date Posted: 26 Nov 2011 at 9:26am

for got to say that it is the cable for the high low and park lever~!!

Posted By: Russ-neia
Date Posted: 26 Nov 2011 at 9:52am

Yes, take seat out, remove floor mat and access panel under seat. Easy to do. Make sure you have ends adjusted correctly so it shifts easily before covering everything up again.

-------------
The innovators offer what others will imitate.

Posted By: Seth Souerdike
Date Posted: 26 Nov 2011 at 10:02am

i don't know about the 8070 but some earlyer modules the entire cab could lift off and and you could get to it. with your type i don't know i hope you get it fixed

-------------
There are no atheist in foxholes.

Posted By: MACK
Date Posted: 26 Nov 2011 at 10:23pm

Could be the cable anchor. Much easer on 80 series than 70 series. MACK

Posted By: acben20
Date Posted: 26 Nov 2011 at 10:41pm

got it fixed thanks for the help~!!