B/C rear steel wheel repair
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41111
Printed Date: 28 Aug 2025 at 11:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B/C rear steel wheel repair
Posted By: Murph-NC
Subject: B/C rear steel wheel repair
Date Posted: 25 Nov 2011 at 8:34pm
Anybody have a patch kit... I had a blowout! But seriously, has anyone done a similar repair on a steel wheel? Finding a donor rim for a 'patch' is difficult. Any ideas? I may just go back with flat steel and not worry about the lip. Oh, and I need one lug if anyone has a spare.
 ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Replies:
Posted By: MNLonnie
Date Posted: 25 Nov 2011 at 8:56pm
|
A while back it was brought up that someone should sacrifice a rear set of steel so everyone else could complete their sets, it seems several people are missing a lug or two. I have 3 sets and of course I put the 2 best ones on my B and C but I have a set with lugs about like yours or a little better that I would tear down if there was enough interested parties. Then I could sell a good wheel without lugs also. Any thoughts or suggestions on that idea? ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Murph-NC
Date Posted: 26 Nov 2011 at 6:36pm
|
Lonnie, I replied to the new topic you started too... I think you'd be a good man to sacrifice a set to help others... you'd probably have enough lugs to fill almost everyone's needs for years to come. Based on the condition of mine, they'd probably be better suited to sacrifice than yours, unfortunately the lugs are pretty worn and might not be good enough for some folks. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |