Farm Equipment - snow plow help

Print Page | Close Window

snow plow help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40950
Printed Date: 29 Aug 2025 at 10:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: snow plow help

Posted By: RockyBottomFarm
Subject: snow plow help
Date Posted: 22 Nov 2011 at 12:45pm

So I'm building mounts to put a 5 foot ATV plow on my tractor. My concern is that the mount might not come off friendly. Anyone have any pics? I google searched in the past and found on here that some one had a B with a plow on it, can someone bump it, I can't find it. They were rebuilding it and replacing worn parts.

Thanks

-------------
38 & 41 B, sickle mower, 2 way plows, rear field cultivator, 2 row drill planter
40 Combine
66 Combine
Roto Baler

Replies:

Posted By: scott
Date Posted: 22 Nov 2011 at 1:17pm

Is a B what youre hooking the plow up to? Kinda light for pushing much snow...

I'd like to hook up a Degelman front blade to my 7040 to really get er done. Combined with the 9' back blade and the weighted and loaded rears and look out!

Have you considered a loader frame and bucket arms to hold your snow blade? I have a setup like that on a smaller tractor, OK, its a Case, but it works good until the snow gets too deep. I think if I had more weight the results would be even better.

Posted By: RockyBottomFarm
Date Posted: 22 Nov 2011 at 1:41pm

Yes I'm putting this on my 38 B. Loader idea might work, but I don't want ta have to put on an additional hydraulic system.

-------------
38 & 41 B, sickle mower, 2 way plows, rear field cultivator, 2 row drill planter
40 Combine
66 Combine
Roto Baler

Posted By: RockyBottomFarm
Date Posted: 22 Nov 2011 at 3:11pm

I found it and bumped it! my plow is not near as big as his. A allis B might be light, but at around 2000lbs, its alot more than the 700lb fourwheeler the plow used to be on! I have rear wheel weights and if need will put fluid in rear tires, then if needed tire chains. I want the plow to mid mount. Using a factory cylinder to lift with a chain. I have half the mount ( and pieces ) made. Think I figured out how I can build mount slightly different and remove it easily yet.

-------------
38 & 41 B, sickle mower, 2 way plows, rear field cultivator, 2 row drill planter
40 Combine
66 Combine
Roto Baler