Farm Equipment - D-14 rear axle housing mounting holes?

Print Page | Close Window

D-14 rear axle housing mounting holes?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40874
Printed Date: 29 Aug 2025 at 7:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-14 rear axle housing mounting holes?

Posted By: Herb(GA)
Subject: D-14 rear axle housing mounting holes?
Date Posted: 20 Nov 2011 at 8:56pm

Our 1958 D-14 has two threaded (approx 5/8" dia) holes, one on front side of axle and other on rear side of axle. Are these holes for bolts for securing some tractor mounted equipment, or what? Herb

Replies:

Posted By: Chalmersbob
Date Posted: 20 Nov 2011 at 9:02pm

the rear ones are used to secure the rear brackets for a loader.

Have fun if you plan on using them, they will be full of dirt and gravel.

Bob

Posted By: RichinWis
Date Posted: 20 Nov 2011 at 9:20pm

They were also for cultivator brackets, and for certain mower brackets.

Posted By: Eldon (WA)
Date Posted: 20 Nov 2011 at 10:43pm

Most I've seen were full of twisted off bolts!

-------------
ALLIS EXPRESS!
This year:

Posted By: Herb(GA)
Date Posted: 23 Nov 2011 at 6:46pm

Thanks for the inputs. I was concerned about using for rear brackets of my loader; sounds as though they are strong enough. Herb

Posted By: jaybmiller
Date Posted: 23 Nov 2011 at 7:30pm

Just be sure to 'chase' out the threads and get rid of ALL the 'stuff in there' BEFORE you put bolts in AND add a good amount of neversieze as well.

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water