7060 and a 6-18 plow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40784
Printed Date: 13 Aug 2025 at 7:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 and a 6-18 plow
Posted By: KevinON
Subject: 7060 and a 6-18 plow
Date Posted: 19 Nov 2011 at 5:45am
|
I have a 6-18 2000 auto reset plow that I originally bought for parts, but it could be rebuilt. Is this something the 7060 would handle in medium to heavy soils?? Thanks, guys.
|
Replies:
Posted By: BobHnwO
Date Posted: 19 Nov 2011 at 5:51am
I pull an IH #720 5/16 plow 9"deep in heavy clay in 5th gear with my 7060PS,have power to spare,all depends on your soil.
-------------
Why do today what you can put off til tomorrow.
|
Posted By: ACfarmboy24
Date Posted: 19 Nov 2011 at 7:40am
They say you need 20 horsepower for each plow plus a little more breathing room so the 7060 is rated at about 136 drawbar horsepower 6x20=120 with 16 horsepower to spare it should pull it in your soil
-------------
AC 200, AC 7045, NH 4630, White 508, CIH 5600, Athens 76, AC 333, Hesston 545
|
Posted By: Byron WC in SW Wi
Date Posted: 19 Nov 2011 at 7:44am
Back in the day I plowed with a 7060 and 7 bottom IH plow in medium to heavy soil on flat land day in and day out no problem. That was near my grandpas in MI and now I live in WI and it's hilly and I'd take a bottom off hear but even six bottoms hear would be fine I'd think.
|
Posted By: R.W
Date Posted: 19 Nov 2011 at 7:45am
|
Dad had 6-16 on our 7030. Said it pulled it just fine.
|
Posted By: Dean/MN
Date Posted: 19 Nov 2011 at 7:31pm
My brother used to work for a guy back in the 70's that had a new 7030 that he pulled 6-16's with.
-------------
HD16,917H,185,7050,8030FWA,8050FWA
|
Posted By: SHAMELESS
Date Posted: 20 Nov 2011 at 1:49am
|
i pulled an IH 5-16's with my 7010 for years...no weight in rear tires! that was on hill clay and bottom silt/gumbo mix.
|
Posted By: 427435
Date Posted: 20 Nov 2011 at 10:52am
We used D21's weighted heavy to test the 8 bottom MonoFrame plows in heavy clay soils. Of course, 2nd gear didn't last very long.
A good 7060 should be just fine with a 6 bottom plow.
-------------
Mark
B10 Allis, 917 Allis, 7116 Simplicity, 7790 Simplicity Diesel,
GTH-L Simplicity
Ignorance is curable-----stupidity is not.
|
Posted By: Dean(IA)
Date Posted: 20 Nov 2011 at 11:19am
427435,
Would you please contact me?
I need to ask a favor.
Dean(IA)
|
Posted By: Dave in il
Date Posted: 20 Nov 2011 at 11:23am
|
We used to pull 6-16's with ours and it did fine.
|
Posted By: WD45
Date Posted: 21 Nov 2011 at 7:43pm
Kevin - an 8030 FWD will do the job.
-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
Posted By: Eric[IL]
Date Posted: 21 Nov 2011 at 7:55pm
|
I have the same combination and it works great. I don't get in a hurry. It runs in 2nd low at a depth of 9-10" deep in silty clay loam. I use the floor shifter on the ends to shuttle across the land to the other returning furrow. My 2000 monobeam has 32" clearance that works good in corn stalks.
|
|