ALLIS 190 AND WESTENDORF WL 27
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40552
Printed Date: 23 Aug 2025 at 11:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ALLIS 190 AND WESTENDORF WL 27
Posted By: tractorman
Subject: ALLIS 190 AND WESTENDORF WL 27
Date Posted: 14 Nov 2011 at 5:12pm
|
hAS ANY BODY GOT EXPERIENCE AND OR PHOTOS WITH MOUNTING THE WESTENDORF WL27 ON A 190 ?. i AM GOING TO DO IT AND WESTENDORF SAID THEY DON'T HAVE A KIT OR PLANS. Okay iam not really doing it but have a very competent welder assembler mechanic that will do it. tRACTORMAN ------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190 |
Replies:
Posted By: m16ty
Date Posted: 14 Nov 2011 at 7:30pm
| I'm pretty sure Westendorf did make brackets for a 190. Maybe they quit because of low demand. I know for a fact they make them for a 185. My uncle has a WL 27 on his 185. I would say a set of 185 brackets could be made to fit with minimal modifications. |
Posted By: StewartMD
Date Posted: 14 Nov 2011 at 8:15pm
|
Our Westendorf TA26 loader was off of a 190XT, we have it on our 185, everything was the same except for where it bolts to the rear axle, we had to make a spacer out of tubing and drop it down with some plate steel. The last time I talked to them they could make the brackets for just about any model/any brand, but I'm not sure what it would cost. ------------- 8030, 8010, 220, 185, 160, D-17, WD, Unstyled WC, CA, G, 20-35, Gleaner E |
Posted By: tractorman
Date Posted: 14 Nov 2011 at 8:32pm
|
but but this one is coming off a deere 3010, could it be a lot different ? tractorman ------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190 |
Posted By: XT in pa
Date Posted: 14 Nov 2011 at 8:50pm
|
we got a kelly 800 off a 1650 oliver for 150$ when i called kelly mfg they said they csnt sell me the brackets cause the loader was on an oliver??? figure that one out we had a local steel shop make everything we needed and it works fine ------------- 190XT,D17and 7045 |
Posted By: m16ty
Date Posted: 14 Nov 2011 at 10:07pm
I was under the impression that you were wanting to buy the correct brackets but Westendorf didn't offer them. If it's coming off a JD, there could be quite a bit of bracket modification. |
tractorman wrote:Posted By: StewartMD
Date Posted: 15 Nov 2011 at 6:26am
|
I would suggest getting a ballpark price from your welder, and getting a quote from Westendorf, if it comes from Westendorf you will know it will be built heavy enough in the right places. ------------- 8030, 8010, 220, 185, 160, D-17, WD, Unstyled WC, CA, G, 20-35, Gleaner E |
Posted By: Lonn
Date Posted: 15 Nov 2011 at 6:36am
|
I, my Dad and a neighbor modified a CaseIH 2250 off a 3220 (way too little of a tractor for the loader) to fit my D19. Works good. Well, as good as a D19 would ever work with the standard hydraulics. Took one weekend with a lot of BS sessions and some beer. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |