Farm Equipment - 125 enging

Print Page | Close Window

125 enging

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40051
Printed Date: 13 Sep 2025 at 4:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 125 enging

Posted By: monkeywrench
Subject: 125 enging
Date Posted: 04 Nov 2011 at 2:21pm

I'm rebuilding a 125 in a CA , When I pulled the head the block is cracked between each liner. Can any one tell me if this is a commen problem ? Or can I put in new liners and run like it is . the teactor does not get run hard . Thanks for any help in advance.

Replies:

Posted By: GlenninPA
Date Posted: 04 Nov 2011 at 2:55pm

If the top web is cracked, the head gasket will most likely seal it. If the bottom web is cracked too, get a new block, that one will be junk.

-------------
Good judgment comes from experience. Experience comes from bad judgment.
From listening comes wisdom and from speaking comes repentance.
Wise men learn more from fools than fools from the wise.

Posted By: B26240
Date Posted: 04 Nov 2011 at 3:20pm

Glenn is right, I've put several together with top cracks and no problems

Posted By: monkeywrench
Date Posted: 04 Nov 2011 at 4:09pm

Thanks for your help , you confermed my thought about the cracks. have a great week end.