All crop 60 chain drive
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39733
Printed Date: 31 Oct 2025 at 6:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All crop 60 chain drive
Posted By: nitehawk
Subject: All crop 60 chain drive
Date Posted: 29 Oct 2011 at 8:07pm
|
Hello all, Havn't been here in a while. Got a problem. Today I broke a chain on my allcrop 60. The sprocket is wore very bad. It is the drive sprocket that goes from the drive shaft with the auger on it under the sieves that drives the clean grain elevator. Can I fella still get those cast sprockets some where for the detachable link chain, or better yet, has anyone just seen it where it is just converted to a regular roller chain drive setup say using a number 50 or 60 chain. Seems like it would hold up better on a working machine. Help, I need to finish combineing my soybeans. David
|
Replies:
Posted By: norm[ind]
Date Posted: 29 Oct 2011 at 8:12pm
| it has run this ???/ would repair with original shain go to salvage yards will be quiskest an cheapest my 2 cents |
Posted By: CTuckerNWIL
Date Posted: 29 Oct 2011 at 9:55pm
|
I found cast sprockets online a few years back when I was working on a Case Snapper. In fact I have a brand new one in the shed yet, no hole in the center so you can bore it to fit.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: nitehawk
Date Posted: 30 Oct 2011 at 5:14pm
| What size sprocket is it? I need one for number 55 flat chain 9 tooth. You don't remember where you got it from by chance. |
Posted By: CTuckerNWIL
Date Posted: 30 Oct 2011 at 6:12pm
|
This was an idler for the gathering chain I think. It was only about 5 tooth. Think I ran 550 roller chain in place of the wore out gathering chain that was on it. Here is one place. http://fcmason.thomasnet.com/viewitems/sprockets/on-stock-bore-sprockets-for-steel-detachable-chain?&sortid=1241&measuresortid=0&sortorder=desc - http://fcmason.thomasnet.com/viewitems/sprockets/on-stock-bore-sprockets-for-steel-detachable-chain?&sortid=1241&measuresortid=0&sortorder=desc Here is another outfit that has chain, sprockets, bushings and bearings along with taper lock bushings and more. http://dlchain.com/images/The%20Catalog%203.pdf - http://dlchain.com/images/The Catalog 3.pdf ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Ray
Date Posted: 30 Oct 2011 at 10:23pm
| I would have what you need. 785-353-2392 |
Posted By: Flint23
Date Posted: 31 Oct 2011 at 3:54pm
is this the one you need? If so you can have it . ------------- been there done that, not doing it again... |
Posted By: nitehawk
Date Posted: 31 Oct 2011 at 4:48pm
|
Thats the one. Even though it looks wore pretty good I would be happy to get it from you for a spare. Could you put it in a small priority mail carton and send it to me. David
|
Posted By: nitehawk
Date Posted: 31 Oct 2011 at 4:50pm
|
Sorry Ray for not responding. Do you have the set, and what kind of shape are they in? I went to a yard up here this afternoon and found a set that will run a while, but I am keeping my eyes open for a really good set so I have spares. Thanks David
|
Posted By: ALinIL
Date Posted: 31 Oct 2011 at 7:04pm
| Hey guys - Try shoupparts.com for the sprocket. - AL |