Marvel schebler TSX 470 Carb.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39453
Printed Date: 05 May 2025 at 2:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Marvel schebler TSX 470 Carb.
Posted By: orangeman
Subject: Marvel schebler TSX 470 Carb.
Date Posted: 24 Oct 2011 at 2:08pm
|
Does anyone have an illustrated schematic they can post up, the ones in the IT manual are too small. I am looking for the illustration that shows the carburetor choke cross shaft and all that attaches to it. Am rebuilding my carb and am missing the cog on the brass shaft that connect to the wire choke control. Thanks in advance for any help. Orangeman
|
Replies:
Posted By: Jeff Z. NY
Date Posted: 24 Oct 2011 at 4:21pm
Here is one from a TSX 486 CA tractor.
 ------------- I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions} |
Posted By: orangeman
Date Posted: 24 Oct 2011 at 4:32pm
|
Hello Jeff: Does the schematic you have show a part name for the following: 1, 2 and 3 and 39, 40 and 41. I tried to access AGCO parts .com to look up myself but was not able to gain access to the schematic page or narrative listing. Thanks again Jeff - appreciate your help! Orangeman
|
Posted By: Jeff Z. NY
Date Posted: 24 Oct 2011 at 5:04pm
|
70225679 1 CARBURETOR ASY. (TSX-486) (Use 70251516)
1 70219996 1 NUT, choke shaft 70909367 1 LOCKWASHER 2 70219968 1 RETAINER, packing choke shaft (ASY. 70225685) 3 70219969 2 PACKING, choke shaft (ASY. 70225685) 4 70219984 1 PLATE ASY., choke 5 70222048 1 GASKET, discharge nozzle (ASY. 70222053, 70225685) 6 70225684 1 NOZZLE, discharge 7 70225681 1 VENTURI 8 70219985 1 FLOAT ASY. 9 70220006 1 JET, idling (ASY. 70225685) 10 70225683 1 JET, econimizer (ASY. 70225685) 11 70224949 1 SEAL, throttle shaft (ASY. 70225685) 12 70219968 1 RETAINER, throttle, shaft seal (ASY. 70225685) 13 70222041 1 SHAFT ASY. (Incl. LEVER and Items 14, 15) (ASY. 70225685) 14 70219977 1 SPRING, throttle stop screw (ASY. 70225685) 15 70222042 1 SCREW, stop throttle lever (ASY. 70225685) 16 70219973 2 SCREW, throttle plate (Incl. LOCKWASHER) (ASY. 70225685) 17 70800465 1 PLUG, throttle body 18 70218872 4 SCREW, fuel bowl to throttle body 19 70225680 1 BODY ASY., throttle (Incl. Items 11 thru 17, 20 & 21) 20 70219971 1 PLATE, throttle 21 70219992 1 PLUG, throttle shaft hole (ASY. 70225685) 22 70219978 1 SPRING, idling adjusting needle 23 70219987 1 NEEDLE, idling adjusting (ASY. 70225685) 24 70219998 1 GASKET, float valve seat (ASY. 70222053, 70225685) 25 70220003 1 VALVE ASY., (Incl. Item 24) (Use 70244912) (ASY. 70225685) 26 70219976 1 GASKET, fuel bowl to throttle body (ASY. 70222053, 70225685) 27 70219986 1 PIN, pivot, float (ASY. 70225685) 28 70219973 2 SCREW, choke plate (Incl. LOCKWASHER) 29 70219975 1 SCREW, choke friction lever 30 70219979 1 SPRING, choke friction lever (ASY. 70225685) 31 70219997 1 WASHER, friction lever screw 32 70219983 1 SHAFT ASY., choke (Incl. LEVER) 33 70225682 1 JET, power (ASY. 70225685) 34 70222038 1 BOWL ASY., fuel (Incl. Items 2, 3 & 36) 35 70224967 1 PLUG, fuel bowl 36 70219967 1 STRAINER, drain, air intake 37 70915514 1 COCK, drain, fuel bowl 70224061 1 PLUG, drain (Supersedes 70222051) 38 70222069 1 SPRING, swivel choke lever 39 70222045 1 SCREW, swivel, choke lever 40 70222044 1 LEVER ASY., choke (Incl. Items 38, 39, & 41) 41 70222046 1 SWIVEL, choke lever 70222053 1 GASKET SET (ASY. 70225685, 70222053) 70225685 1 REPAIR KIT (ASY. 70225685) ------------- I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions} |
Posted By: orangeman
Date Posted: 24 Oct 2011 at 6:01pm
| Wow: thats perfect Jeff. Thanks so much! Orangeman. |
Posted By: Jeff Z. NY
Date Posted: 24 Oct 2011 at 8:24pm
|
Glad to help.
You will find that AGCO will probably not have any of these parts. I buy alot of parts from Robert's Carburetors. They are for different Marvel carburetors but alot of the parts will interchange with many different models. ------------- I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions} |
Posted By: orangeman
Date Posted: 25 Oct 2011 at 4:17am
| Jeff: good to know the Roberts carburetor contact, I will check with VE Petersen as well. Thanks again - Orangeman |
Posted By: Steve in NJ
Date Posted: 25 Oct 2011 at 9:50am
|
We service and rebuild M/S and Zenith carbs. Have quite a few parts in stock for both. Let me know what parts are needed if interested.
mailto:Steve@B&B - Steve@B&B
|