Farm Equipment

Print Page | Close Window

header

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39227
Printed Date: 01 Oct 2025 at 12:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: header

Posted By: bradley6874
Subject: header
Date Posted: 19 Oct 2011 at 4:09pm

will a n 438 corn head from a r42 fit a m2 i dont think so but got to check its a good deal

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul

Replies:

Posted By: Adam Stratton
Date Posted: 19 Oct 2011 at 5:53pm

I would be surprised. I bought an n/r series head thinking I could make it work on my L/M combines. The width problem seems like it could be overcome, but the height of the hole for the throat is something like 8 inches different from the N6 header I bought to my L/M headers. If it has the adjustable rows like the older corn heads do, you could probably take each unit off and put it on your frame.

Posted By: bradley6874
Date Posted: 19 Oct 2011 at 6:07pm

thanks for the info think i will leave it where it is

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul