D15 pushrods vs. B,C,CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=38681
Printed Date: 30 Sep 2025 at 8:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 pushrods vs. B,C,CA
Posted By: pirlbeck
Subject: D15 pushrods vs. B,C,CA
Date Posted: 10 Oct 2011 at 7:27am
|
Would anyone know what the difference is between the B,C &CA (70207426) pushrods vs. the D10,D12,D14 & D15 (70227633) pushrod? I need three for a D15, and I was hoping the older ones would work.
Thanks!
|
Replies:
Posted By: Tony.Or
Date Posted: 10 Oct 2011 at 10:19am
|
B_C_CA Push rods are 9-7/8 long. I don`t have a 149 push rod left to measure , but the are way different. Tony ------------- http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com |
Posted By: JimD
Date Posted: 10 Oct 2011 at 10:59am
|
Is your D15 a 149 Cu in, or 160? If it's a 160, you would be happy to pay the the price of the 149. I have 3 of the 160's. ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: pirlbeck
Date Posted: 10 Oct 2011 at 11:25am
It is a 160. On the Agco online parts lookup I don't see where there is any difference between the 149 and 160 pushrods.
Do you want to sell 3 of them?
|
JimD wrote:Posted By: Dick L
Date Posted: 10 Oct 2011 at 1:14pm
| I have a tub that has 50 or more push rods from B's, C's, CA's and one D-15. I have looked thru them a few times and have not found any pushrods that were different. I have never spent a lot of time getting more than a good set out of the tub at a time. It has been ten years or more since I chucked the D-15 pushrods in that tub but if they had looked different I would not have tossed them in there. I do know that the lifters are the same and carry the same aftermarket part numbers. So the down end would have to be the same. As I remember the head bolts and rocker arms were the same also which would lead me to believe with the head the samre thickness that the pushrods were the same. I would bet they would work in any case. |
Posted By: pirlbeck
Date Posted: 10 Oct 2011 at 2:11pm
| OK, I got one out and measured from the D15. 9-3/16" overall length, so they are shorter then the B,C,CA pushrods. |
Posted By: norm[ind]
Date Posted: 10 Oct 2011 at 7:36pm
| yes they are differentinlength have some of both 1-800-254-3116 tappet end is also different |