Plow shares
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=37802
Printed Date: 08 Sep 2025 at 8:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plow shares
Posted By: Bryan
Subject: Plow shares
Date Posted: 23 Sep 2011 at 6:10pm
Any body know where I can get some plow shares for 363-14. That is the number on my moldboard.
Thanks, Bryan
|
Replies:
Posted By: Gerald J.
Date Posted: 23 Sep 2011 at 8:48pm
I don't have any shares, but these number are in my plow bottoms book.
I presume right hand. The same moldboard (325604) was used for 363-12 and 363-14 right hand. The differences between 361, 362 and 363 are in the moldboards.
AC called them bullet blades instead of shares. I don't know why.
12" regular is 326056. 12" heavy duty is 326826. 12" HD narrow cut is 338476.
14" regular 325614, 14" HD is 326082.
Almost the fewest options for shares of anny AC plow bottom.
Osmundson used to make a 325614 rock share, but apparently no more according to their catalog page. It was their part number OA 14-4RS.
Gerald J.
|
Posted By: Bryan
Date Posted: 01 Oct 2011 at 9:05pm
Posted By: Dusty MI
Date Posted: 02 Oct 2011 at 10:39am
|
When the new type of shares came out each company gave them a name, A.C. Bullet Point, Oliver Radix, etc.
Dusty
-------------
917 H, '48 G, '65 D-10 series III "Allis Express"
|
Posted By: Rfdeere
Date Posted: 02 Oct 2011 at 5:09pm
Bryan, if you can measure the old shares (Length of share at top, spacing of bolt holes, top of share to bolt holes, how many holes) I can see if I have some.
-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
|