Farm Equipment - Were some Band C front hubs different?

Print Page | Close Window

Were some Band C front hubs different?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=37595
Printed Date: 05 Oct 2025 at 12:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Were some Band C front hubs different?

Posted By: Dean(IA)
Subject: Were some Band C front hubs different?
Date Posted: 20 Sep 2011 at 8:52am

The 41 C front tires are about 1" apart at the bottom and the CA sitting
next to it has about 2" of space at the bottom. Were some B and C
hubs different? The hubs assembled normally onto the spindles, but
the 5:00 X 15 new tires rub on the top of the pedestal on the C.

Replies:

Posted By: Jeff Z. NY
Date Posted: 20 Sep 2011 at 9:05am

There were several hubs used over the years.

-------------
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}

Posted By: Alberta Phil
Date Posted: 20 Sep 2011 at 10:10am

I think your tires are too big. 'C' specs show 4.00 X 15 as the tire size. CA used 5.00 X 15.

Posted By: Ken in Texas
Date Posted: 20 Sep 2011 at 12:02pm

OK But a C and a CA NF have the same Spindal Assembly part # 225121. The CA hubs look the same as a C hub but have different part numbers as do the rims themselves. Pretty sure they will interchange though. All the B C CA hubs use the same bearings and seals. There may be a slight difference in the hub or wheel the offsets but I don't think so.

Alberta Phill is right on about the tire spec size difference