Farm Equipment - WD throttle help

Print Page | Close Window

WD throttle help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=37306
Printed Date: 04 Nov 2025 at 10:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD throttle help

Posted By: Josh Day
Subject: WD throttle help
Date Posted: 15 Sep 2011 at 10:47am

When I set the throttle lever on my WD to low idle and if you hit the steering wheel, or anything in that area lightly, it slides to half throttle. It has been getting worse the past few times I have used it.Now, if you set it to low idle as soon as you let go of the lever it will go to half throttle. Now I need to wire it just to keep it at low idle. What could be causing this? Thanks

Replies:

Posted By: Josh Day
Date Posted: 15 Sep 2011 at 8:28pm

bump

Posted By: Rfdeere
Date Posted: 15 Sep 2011 at 8:33pm

The friction blocks may be worn out or the spring behind the quadrant may be broke. Or both of these.

-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com

Posted By: MACK
Date Posted: 15 Sep 2011 at 8:42pm

Is the spring under fuel tank hooked up?

RFDEERE is most likely correct. MACK