Farm Equipment - crankshaft torque pattern on wd

Print Page | Close Window

crankshaft torque pattern on wd

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=36086
Printed Date: 15 Jun 2025 at 2:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: crankshaft torque pattern on wd

Posted By: acdad
Subject: crankshaft torque pattern on wd
Date Posted: 24 Aug 2011 at 9:17pm

new to working on ac tractors all i have for a manual is an I&T. It doesn't tell me what the crankshaft main bolt torque pattern is on my wd it tells me to torque them to 85 ft. ibs but that is all thank you for any help.

Replies:

Posted By: CTuckerNWIL
Date Posted: 24 Aug 2011 at 9:36pm

There are only 2 bolts on a main bearing. Go back and forth between them tightening each one a little at a time.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: CTuckerNWIL
Date Posted: 24 Aug 2011 at 9:39pm

The main thing on tightening these up is making sure you have the proper amount of shim in place or you will over crush the bearings and things won't turn like they should.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: acdad
Date Posted: 24 Aug 2011 at 10:00pm

thank's for the info