Farm Equipment - 3pt arm width on D17 IV

Print Page | Close Window

3pt arm width on D17 IV

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=35367
Printed Date: 30 Sep 2025 at 3:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 3pt arm width on D17 IV

Posted By: Greg_WJP_(WI)
Subject: 3pt arm width on D17 IV
Date Posted: 11 Aug 2011 at 12:04pm

I was hoping someone would know how narrow the arms of a factory 3-pt hitch on a D17 IV can go? I don't have the opportunity to measure mine before I head out of town tomorrow. I'm hoping to pick up a piece of equipment on the way, but only if it will work for me. I need it to go down to 26".

Thanks for any help.

Greg

Replies:

Posted By: Pat the Plumber CIL
Date Posted: 11 Aug 2011 at 12:45pm

Was home at lunch and went out and measured 17 1/2" inside arms with no sway blocks, 21" outside arms. 1964 Ser IV factory 3 pt.

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.

Posted By: Greg_WJP_(WI)
Date Posted: 11 Aug 2011 at 1:23pm

Thanks Pat. I greatly appreciate you taking the time to help out.

Greg