Split front weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34732
Printed Date: 05 Apr 2026 at 12:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Split front weights
Posted By: randy
Subject: Split front weights
Date Posted: 30 Jul 2011 at 5:05pm
Did Allis Chalmers make these weights? Hard to read the numbers, I took them off my WD45. ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Replies:
Posted By: CTuckerNWIL
Date Posted: 30 Jul 2011 at 5:22pm
Looks like a D10 front inner wheel weight. http://www.brianahart.net/weights.htm - http://www.brianahart.net/weights.htm  ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Bill Deppe/AC Salvag
Date Posted: 30 Jul 2011 at 9:52pm
| Believe I have a set like that from a I600 that was parted out |
Posted By: MBwcIll
Date Posted: 30 Jul 2011 at 9:57pm
| Yes, we had a set for our D19, I'll see if I can find the part # tomorrow. We now use them on our 8N Ford. |
Posted By: Rfdeere
Date Posted: 31 Jul 2011 at 7:14pm
|
Those D10 weights have indentations at the bolt holes that Randy's do not have. ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: CTuckerNWIL
Date Posted: 31 Jul 2011 at 9:09pm
I noticed that too, but you can't see the front side of the one half of Randy's weoght. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Rfdeere wrote:Posted By: Eldon (WA)
Date Posted: 31 Jul 2011 at 11:58pm
|
I have a set from a D12, but missing one. Looking for someone who has an odd number and willing to sell a half. ------------- ALLIS EXPRESS! This year: |
Posted By: KGood
Date Posted: 01 Aug 2011 at 6:59am
| Look on the latest cover of old Allis news the D19 has them on the inside front wheels and one piece weights one the outside |
Posted By: Brian F(IL)
Date Posted: 01 Aug 2011 at 8:33am
| i have split inside weights on my WD-45 that look similar to yours. Don't know if AC made them or not. I got them from a guy that had them on a WD-45 also. |
Posted By: TedBuiskerN.IL.
Date Posted: 01 Aug 2011 at 3:46pm
|
Check for a casting number, it should begin with AM-. ------------- Most problems can be solved with the proper application of high explosives. |