Farm Equipment - clip on tines for gleaner hume reel

Print Page | Close Window

clip on tines for gleaner hume reel

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34702
Printed Date: 01 May 2025 at 9:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: clip on tines for gleaner hume reel

Posted By: wjkrostek
Subject: clip on tines for gleaner hume reel
Date Posted: 29 Jul 2011 at 10:54pm

I need to fix all the boards on a gleaner E3 I just bought but don't want to drill 144 holes the long way in reel boards. Some of the broken springs have been replaced with clip on type springs. I can't find any or anyone that knows what I'm talking about. Can you stear me in the right direction. or give me other ideas I can use.

Replies:

Posted By: MACK
Date Posted: 30 Jul 2011 at 7:01am

You can buy the boards with teeth in them will have to cut to length. Gleaner-jd-IH. MACK

Posted By: Adam Stratton
Date Posted: 30 Jul 2011 at 7:49am

I second what Mack says. Find someone junking out an reel and buy the boards off them, then cut to length. I have also seen guys take the plastic replacement teeth and just use a cordless drill and driver to put 2 screws through them instead of just one, and fastened the plastic teeth to the wooden boards. Looked a little tacky, but they claimed it got the job done.

Posted By: wjkrostek
Date Posted: 30 Jul 2011 at 9:46am

when I found a place that sells the boards the were $110 each and he didn't know if it included the tines or not. He also said he never has sold one. I can see why, I need all 12 so at that price I could get another combine.

Posted By: wjkrostek
Date Posted: 30 Jul 2011 at 9:49am

where are you finding these boards you can cut?