Construction and other equipment - HD6E track adjuster

Print Page | Close Window

HD6E track adjuster

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34571
Printed Date: 30 May 2025 at 2:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6E track adjuster

Posted By: HD6 Merv
Subject: HD6E track adjuster
Date Posted: 27 Jul 2011 at 5:10pm

Hi All

Pulled yoke and threaded adjuster out of my HD6E and gave it to a engineer mate to make up a new threaded adjuster. Said machine is USA made and will be a UNC thread; and he later called back adamant that thread is metric with a 4.5mm pitch.

Said that makes no sense; so said I,d ask the question here.

Thanks in advance. Merv

Replies:

Posted By: Mactractor
Date Posted: 28 Jul 2011 at 4:27am

The HD6 owners around ya have told you about that one before. By the way, of all the HD6 photos you have posted, which one is your tractor HD6 Merv?

Posted By: dadsdozerhd5b
Date Posted: 28 Jul 2011 at 7:25pm

i swear they were 1-1/2" fine thread bolts but cannot find where i read that to verify. now i am on the lookout!

-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.

Posted By: Dozer
Date Posted: 16 Aug 2011 at 4:10pm

The track djusters on my HD6G measure 1.60 x 5 1/2 TPI
I am making hydralic track adjusters for my machine.

I am looking for an exhaust manifold for a 7000 engine. The 7000 engine not the 7000 tractor.